Seat removal

The place to "speak geek"
Post Reply
User avatar
jimbo
Posts: 755
Joined: Thu Mar 10, 2011 6:48 pm
Location: bucksburn, aberdeen

Seat removal

Post by jimbo » Sat Feb 16, 2013 5:26 pm

Anybody fancy posting an idiots guide to removing the seats from the S1?

The various bolts/washers in mine seem rusty, and I think the seat rail is broken as it refuses to slide back and forth now

Cheers

James

Sent from my TITAN X310e using Board Express
S1 Elise 111s
Top
User avatar
Mikie711
Posts: 4352
Joined: Mon Sep 10, 2007 11:21 pm
Location: Aberdeenshire.
Contact:
Contact Mikie711

Re: Seat removal

Post by Mikie711 » Sat Feb 16, 2013 6:23 pm

There is only 4 bolts holding the runners to the floor. 2 at the front and 2 at the rear. If you want pop round tomorrow and I;ll show you where everything goes on mine as they are essentially the same.
Elise S2 260
Audi RS3
RRS HST
Triumph Trident 660
Triumph Speed Triple 1200RX
Top
User avatar
tut
Barefoot Ninja
Posts: 22975
Joined: Tue Mar 15, 2005 5:53 pm
Location: Tut End, Glen of Newmill

Re: Seat removal

Post by tut » Sat Feb 16, 2013 8:14 pm

Three are easy to get at, one is more awkward.

Start off by giving a good overnight soaking in WD40 or similar.

tut
Top
User avatar
jimbo
Posts: 755
Joined: Thu Mar 10, 2011 6:48 pm
Location: bucksburn, aberdeen

RE: Seat removal

Post by jimbo » Sat Feb 16, 2013 9:04 pm

Cool, thanks guys. PM sent

Sent from my TITAN X310e using Board Express
S1 Elise 111s
Top
Post Reply

Return to “Technical”