MOT time, fingers crossed... Passed!

Rich H · Post by **Rich H** » Fri Aug 10, 2007 12:41 pm

Well my car is repaired and has been sent for its MOT.

What is the minimum tread allowance for MOT? There is about 3mm on the rears, just over the wear markers (Just) will it pass like that?

BiggestNizzy · Post by **BiggestNizzy** » Fri Aug 10, 2007 12:44 pm

1.6mm

http://www.ukmot.com/4-1.asp

MacK · Post by **MacK** » Fri Aug 10, 2007 12:48 pm

Wear markers are at the minimum level, so if over the wear markers then that is okay, even if on the wear markers that should be okay, because it is at the minimum allowable tread depth, and not bellow it.

Good Luck.

Rich H · Post by **Rich H** » Fri Aug 10, 2007 1:20 pm

Cool cheers! It'll fail on emissions then...

mac · Post by **mac** » Fri Aug 10, 2007 1:36 pm

wear markers not at 2mm?

Mac

MacK · Post by **MacK** » Fri Aug 10, 2007 1:38 pm

mac wrote:wear markers not at 2mm?

Mac

Could be, I've never measured them.

Rich H · Post by **Rich H** » Fri Aug 10, 2007 2:49 pm

It passed! Couple of bulbs out, nothing more!

Picking it up at 6 tonight, another big

for Phoenix motorsport and Mathersons Bodyshop!

Rich H · Post by **Rich H** » Sat Aug 11, 2007 10:45 am

Picked up, back to normal! No judder at 80 tuts+ and nice and clean, just got to keep it that way!

Passed its MOT but discovered this morning I had no side lights, number plate lights or rear reds (Got brake lights though)

Both side light fuses had blown

Post by **Shug** » Sat Aug 11, 2007 11:31 am

The Shed rides again

Rich H · Post by **Rich H** » Sat Aug 11, 2007 1:39 pm

I have to be careful we have a SKIP on the drive at the moment, I wouldn't want to bump into it, eh Shug?...

BiggestNizzy · Post by **BiggestNizzy** » Sat Aug 11, 2007 1:58 pm

RICHARDHUMBLE wrote:I have to be careful we have a SKIP on the drive at the moment, I wouldn't want to bump into it, eh Shug?...

or jump in and try and drive it off