VCDS / OBDEleven - West Lothian - NLC

[ed]

On the off chance....

Anyone nearby able to help me recode my golf for a new battery?

TIA

[steve_weegie]

Hello Ed! You get this sorted? I have a VAS5054a which will do this if you're stuck....

[Mikie711]

I am down week Friday and have OBDeleven which should be able to do it for you.

[ed]

Thanks alot both, really appreciated.

To be honest I dont fully understand how this all works.

This is the bit from the guide that I need to do:

VCDS coding required
From the Main screen:-
Select Control Module [Select]
[19-CAN Gateway]
Advanced Functions screen:-
[Adaptions-10]
New value choice screen:-
Change the following four channels, inputting the relevant data about the new battery.
IDE03256-MAS06105-Battery adaptation-Rated battery capacity,
IDE03256-MAS06106-Battery adaptation-Battery technology,
IDE03256-MAS06107-Battery adaptation-Battery manufacturer,
IDE03256-MAS06108-Battery adaptation-Battery Serial Number,

Battery BEM codes are now redundant with the above separate channels. The most important channels are, Rated battery capacity, Battery technology, & Battery Serial Number. For the Battery Serial Number, just change one digit of the old one. This channel tells the BCM that a new battery has been installed & to relearn the new battery & forget any “learnt values” for the old battery!

Corbie offered to sort it for me next week but he is a busy guy.

Will let you know, thanks again!

[ed]

All sorted, thanks again!

[ed]

Ive now ordered an OBDeleven for myself so if anyone needs anything done to any of the below:
AUDI
VOLKSWAGEN
SEAT
ŠKODA
LAMBORGHINI
BENTLEY

Let me know and I should be able to sort it!

[campbell]

Do you do servicing and chipping?

[Mikie711]

And for anyone in the North East I have an OBDeleven for all your VAG woes

[ed]

Thanks again Mike, great piece of kit!