flickering '!' on dash when caning it
flickering '!' on dash when caning it
cars just been serviced and mot'd. since it came back from the service the ! warning light has been flickering. pretty much only while bouncing through bumpy corners or hard acceleration over bumps. thought it was maybe the handbrake switch as i noticed the handbrake cables have been tightened. however, it appears the ! doesnt come on with the handbrake at all!
ant ideas?
ant ideas?
Re: flickering '!' on dash when caning it
Sounds like your brake fluid level might be a little low.
Re: flickering '!' on dash when caning it
Low brake fluid level triggering the warning on the reservoir sensor under G?
Edit - Beaten!
Edit - Beaten!
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
Re: flickering '!' on dash when caning it
cheers. ill give that a shot. level looks fine(between min/max) but ill top it up and see how it goes
Re: flickering '!' on dash when caning it
It does mean you're trying hard, mind. Think of it as a low-tech G meter 
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
Re: flickering '!' on dash when caning it
Honda rules..........

tut

tut
Re: flickering '!' on dash when caning it
What the hell are you on about?tut wrote:Honda rules..........
tut
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
Re: flickering '!' on dash when caning it
It's your handbrake warning switch cabling the light doesn't come on with the switch, because the wires have been chopped somewhere and now they only come on when the severed end touches the chassis, somewhere?Dipper wrote:cars just been serviced and mot'd. since it came back from the service the ! warning light has been flickering. pretty much only while bouncing through bumpy corners or hard acceleration over bumps. thought it was maybe the handbrake switch as i noticed the handbrake cables have been tightened. however, it appears the ! doesnt come on with the handbrake at all!
ant ideas?
Cheers,
Robin
I is in your loomz nibblin ur wirez
#bemoretut
#bemoretut
Re: flickering '!' on dash when caning it
As he has a Honda he is pulling more G.
tut
ps:- bit pathetic really.........
tut
ps:- bit pathetic really.........
Re: flickering '!' on dash when caning it
Aaaaahhhhhtut wrote:As he has a Honda he is pulling more G.
tut
ps:- bit pathetic really.........
Gotcha now. Wasn't aware 'twas a Honda'd motor.
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
Re: flickering '!' on dash when caning it
ive topped it up. will know tomorrow if thats sorted it although i suspect robin may be onto something. bit coincidental that the handbrake switch isnt bring the light on
might be pathetic tut but i have to agree. Honda rules!
might be pathetic tut but i have to agree. Honda rules!
Re: flickering '!' on dash when caning it
well looks like it was just the level and the handbrake switch is a different issue. cheers for the help
:
- sendmyusername
- Posts: 378
- Joined: Mon Oct 01, 2012 7:03 pm
Re: flickering '!' on dash when caning it
Get a length of wire and short the two contacts of the switch together on the handbrake switch. (the bit where the cables attach to it) if the light goes on and off, it's the switch, it might just need set up though as quite pernickety. (see thread about 5 topics below)