Steaming
Re: Steaming
well, my pods where misting up too eric, so the trick i did on my pods was to drill a 4mm hole in the bottom tip end to allow the moister to escape…it works a treat.
if you are to do this be very careful when drilling, i would recommend using a hand drill, and gently drill through it.
leigh
if you are to do this be very careful when drilling, i would recommend using a hand drill, and gently drill through it.
captian james t kirk-i am sorry i cant hear you, over the sound of how awesome i am-
1998 Audi Elige s1-1.8t 20v
05 Exige S2 - stage 2- Piperx VIS induction
1998 Audi Elige s1-1.8t 20v
05 Exige S2 - stage 2- Piperx VIS induction
Re: Steaming
I had one indicator that used to fill up with water and I just drilled it too , one hole in the bottom to drain and one in the top corner to ventilate.
2012 VW Caddy 3.2 v6 'sleeper'


Re: Steaming
Brilliant advice,think a steady hand will be needed for this operation,will need to keep off the shandy for a while.Cheers guys 
Daytona 675
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Re: Steaming
No need to take a drill to your lights Eric.
You have the newer style light pod than Leigh has on his Exige. Check out the second pic in this post on Lotus Talk. You will see that despite these being "sealed" units, there is already a hole in the bottom of the housing. You'll just have some moisture in there which should dry out soon enough with all this good weather we're having.
Noticed both mine were fogged up when out the other evening. Don't think its anything to worry about.
You have the newer style light pod than Leigh has on his Exige. Check out the second pic in this post on Lotus Talk. You will see that despite these being "sealed" units, there is already a hole in the bottom of the housing. You'll just have some moisture in there which should dry out soon enough with all this good weather we're having.
Noticed both mine were fogged up when out the other evening. Don't think its anything to worry about.
Experience is something you get, just after you need it!!
Persian Blue Elise R
Persian Blue Elise R
Re: Steaming
Hi Steven,good to know that i`m not the only person with the fogging.Thanks for saving me from the killer driller routine.I spoke to Craig at MMc and he told me to drop by as it`s a quick fix,so i`m planning to take a run through next Wednesday,i`ll let you know how i get on.ste7en wrote:No need to take a drill to your lights Eric.
You have the newer style light pod than Leigh has on his Exige. Check out the second pic in this post on Lotus Talk. You will see that despite these being "sealed" units, there is already a hole in the bottom of the housing. You'll just have some moisture in there which should dry out soon enough with all this good weather we're having.
Noticed both mine were fogged up when out the other evening. Don't think its anything to worry about.
It`s been a while since the last Weegie run about time we all got together again,i`ll try and arrange something after the band of rain that`s coming has passed through. Cheers,Eric.
Daytona 675
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Re: Steaming
Sounds good! Should give me time to put my car back together (in bits as I'm changing the manifold).gasgas wrote: It`s been a while since the last Weegie run about time we all got together again,i`ll try and arrange something after the band of rain that`s coming has passed through. Cheers,Eric.
Re: Steaming
Sorry thought you meant the indicator. So whats the fix for the newer headlamps, do they just duct tape the holes
p.s you had the Montie out recently?
2012 VW Caddy 3.2 v6 'sleeper'


Re: Steaming
LotusLee wrote:Sorry thought you meant the indicator. So whats the fix for the newer headlamps, do they just duct tape the holesp.s you had the Montie out recently?
soz eric i thought you ment the indicator, as well
captian james t kirk-i am sorry i cant hear you, over the sound of how awesome i am-
1998 Audi Elige s1-1.8t 20v
05 Exige S2 - stage 2- Piperx VIS induction
1998 Audi Elige s1-1.8t 20v
05 Exige S2 - stage 2- Piperx VIS induction
Re: Steaming
LotusLee wrote:Sorry thought you meant the indicator. So whats the fix for the newer headlamps, do they just duct tape the holesp.s you had the Montie out recently?
Hi Lee,sounds like this is a common problem,did`nt do any drilling of the headlamps thank goodness.I have`nt had the montie out for ages,you might just have planted a seed of inspiration,last time i took it out i knackered my knee and was out of the game for ages,i`ll need to get it turned over and used.Do you go on any of the runs? If so it would be good to catch up for a blether.
All the best,Eric.
Daytona 675
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Re: Steaming
Dominic wrote:Sounds good! Should give me time to put my car back together (in bits as I'm changing the manifold).gasgas wrote: It`s been a while since the last Weegie run about time we all got together again,i`ll try and arrange something after the band of rain that`s coming has passed through. Cheers,Eric.
Maybe midweek next week,i`ll post up if it`s on.
Daytona 675
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Montesa Cota
Sunbeam S7(long term build spec)
VW GOLF GT TDi
Re: Steaming
No I haven't been on any SE runs in the Exige
, hope to at some point though.
2012 VW Caddy 3.2 v6 'sleeper'

