splitter

[twisted2fit]

hi

in the process of removing the old damaged splitter and putting a new one on my exige. Had a look and seems straightforward. Do i need to be aware of anythin before i try a lil diy:-)

k

[Peter76]

Not really. I've had mine off a few times and will again at the weekend. I always give the parts that meet a good clean as there's always grit etc gets stuck between the body and splitter. Watch none of the clips come off and make sure they are all fairly central before re-fitting.

[scoobyc]

+1 as above, 5 minute job with nothing complicated to worry about just a ratchet and socket and something soft to set it onto (although that might not even be needed if its knackered!)