clio speedo(nlc)

The place to "speak geek"
Post Reply
User avatar
BiggestNizzy
Posts: 8932
Joined: Sun May 27, 2007 6:47 pm
Location: Kilmarnock
Contact:

clio speedo(nlc)

Post by BiggestNizzy » Mon Oct 12, 2009 2:33 pm

it's stopped working ,everything else seems ok my guessing it's the wiring or the sensor any idea where it is or anything else i can check
Sent from my ZX SPECTRUM +2A

User avatar
jen
Girl racer
Posts: 2041
Joined: Mon Apr 13, 2009 7:27 pm
Location: Edinburgh

Re: clio speedo(nlc)

Post by jen » Mon Oct 12, 2009 5:49 pm

Ours is the same. It's most likely the sender that's the problem, it's right next to the manifold and they get cooked. Ours works for a while after a trackday for some reason!!

User avatar
BiggestNizzy
Posts: 8932
Joined: Sun May 27, 2007 6:47 pm
Location: Kilmarnock
Contact:

Re: clio speedo(nlc)

Post by BiggestNizzy » Mon Oct 12, 2009 6:29 pm

I will have a nosey around there tommorow as it has started working again
Sent from my ZX SPECTRUM +2A

User avatar
BiggestNizzy
Posts: 8932
Joined: Sun May 27, 2007 6:47 pm
Location: Kilmarnock
Contact:

Re: clio speedo(nlc)

Post by BiggestNizzy » Tue Oct 13, 2009 8:07 pm

popped the sensor off and everything looked ok, I also ran the dash through its test pattern and everything worked there.

if it happens again I will replace the sensor.
Sent from my ZX SPECTRUM +2A

Post Reply