help alarm knackered!!

The place to "speak geek"
User avatar
MacK
Posts: 2071
Joined: Mon Sep 19, 2005 3:27 pm
Location: Edinburgh

Post by MacK » Mon May 08, 2006 12:08 pm

p.s. you have checked the fuse?

:wink:

User avatar
ninja
Posts: 1086
Joined: Mon Aug 01, 2005 8:43 am
Location: Motherwell

Post by ninja » Mon May 08, 2006 2:00 pm

the fuse?

well the alarm still imobilises the car and the indicators still flash so i guessed the fuse was ok tbh - is there a seperate one for hte siren?

the horn is thru the little grille on the frond passengers side - found this on saturday after 2 hours of hacking away at the car and thought i'd found gold only to get natalie to hit the horn and almost deafen me!

ninja :drive

User avatar
Shug
Posts: 13835
Joined: Wed Mar 09, 2005 8:28 pm
Location: Deepest, Darkest Ayrshire

Post by Shug » Mon May 08, 2006 2:04 pm

Here's a left-field suggestion...

Has it ever worked?

If not, are you sure that it hasn't been removed for some strange reason? Is the siren a separate unit from the alarm itself?

This is just me going through a wee logic process, I have no idea about the alarm on the S2 (and very little about the S1)

8)
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R

User avatar
ninja
Posts: 1086
Joined: Mon Aug 01, 2005 8:43 am
Location: Motherwell

Post by ninja » Mon May 08, 2006 2:17 pm

yeah it used to work before i washed the car!

think i may have drowned the siren at some point

ninja :drive

User avatar
Scottd
Posts: 964
Joined: Thu Mar 10, 2005 1:26 am
Location: Dundee

Post by Scottd » Mon May 08, 2006 2:40 pm

ninja wrote:the fuse?
...is there a seperate one for hte siren?
Yea there is for the S1 Cobra 6422. Can't remember which fuse tho.

scott

User avatar
ninja
Posts: 1086
Joined: Mon Aug 01, 2005 8:43 am
Location: Motherwell

Post by ninja » Mon May 08, 2006 4:20 pm

interesting stuff - i'll check the er fuse! going to be very embarrassed if that's the only problem!

ninja :drive

User avatar
MacK
Posts: 2071
Joined: Mon Sep 19, 2005 3:27 pm
Location: Edinburgh

Post by MacK » Mon May 08, 2006 6:07 pm

Service manual shows Fuse number 2, 2Amp being for Alarm Siren....

Fuse should be black and it looks like the only 2amp in there..

blackbird
Posts: 18
Joined: Wed Mar 08, 2006 10:30 pm
Location: edinburgh

Post by blackbird » Wed May 10, 2006 10:34 pm

you cant fit a siren ,the one in your car is not just a siren it has electronics in it that are part of the alarm and it will only work with the control box that it is matched to

User avatar
Tom
Posts: 3220
Joined: Mon Mar 06, 2006 5:50 pm
Location: UK

Post by Tom » Tue May 30, 2006 10:51 am

I now have a non working siren on an S1. System works other than that. Have checked the fuses, all fine. Phoned MMC, said i need the code from when it was first installed, otherwise a whole new system is needed :shock: . Anyone else had experience with S1 siren's packing up?

User avatar
Sanjøy
Posts: 8828
Joined: Sun Oct 02, 2005 8:23 pm
Location: Edinburgh Hamptons

Post by Sanjøy » Tue May 30, 2006 12:14 pm

No but I have contacted Lotus before for mt Cat1 certificate for insurance purposes so if it was a factory fit they will have it on record.
W213 All Terrain

User avatar
mac
Posts: 6880
Joined: Mon Sep 19, 2005 4:36 pm

Post by mac » Tue Jul 11, 2006 11:14 am

Ninja,

I've found the siren module on my car - so should be in the same place in yours.


Go to the front of the car - lie on the ground - in front of you there is the main grill with the driving lamps - to the left and right there are smaller grills - if you peer into the right hand one (pax side) you'll find a small black box - it's the siren.


HTH


Mac
S2 Elise (cobalt blue with stripes) - toy spec
Caterham 7 - hillclimb spec
Yamaha Thundercat - 2 wheeled toy spec

User avatar
Tom
Posts: 3220
Joined: Mon Mar 06, 2006 5:50 pm
Location: UK

Post by Tom » Tue Jul 11, 2006 11:26 am

also the gumf MMC spouted at me isn't quite correct. The 6422 on the S1 is a plug and play system. MMC wanted £162 to supply and fit the new siren, including getting a code from the factory. I have spoken to cobra, two minute job to fit the siren yourself, undo bolts, unplug siren, plug in new siren, do bolts back up. Job done.

£62 for siren from Ray Smith delivered. No worries. £100 saved :D .
1995 Volvo 940SE Estate

User avatar
Sanjøy
Posts: 8828
Joined: Sun Oct 02, 2005 8:23 pm
Location: Edinburgh Hamptons

Post by Sanjøy » Tue Jul 11, 2006 11:34 am

Might want to contact Lotus and update them with the serials etc and get your CAT1 certificate from them.

CBrown2@lotuscars.co.uk (Chris Brown)
W213 All Terrain

User avatar
Tom
Posts: 3220
Joined: Mon Mar 06, 2006 5:50 pm
Location: UK

Post by Tom » Tue Jul 11, 2006 11:39 am

Sanjoy wrote:Might want to contact Lotus and update them with the serials etc and get your CAT1 certificate from them.

CBrown2@lotuscars.co.uk (Chris Brown)
cheers :thumbsup
1995 Volvo 940SE Estate

User avatar
ninja
Posts: 1086
Joined: Mon Aug 01, 2005 8:43 am
Location: Motherwell

Post by ninja » Wed Jul 12, 2006 4:28 pm

mac wrote:Ninja,

I've found the siren module on my car - so should be in the same place in yours.


Go to the front of the car - lie on the ground - in front of you there is the main grill with the driving lamps - to the left and right there are smaller grills - if you peer into the right hand one (pax side) you'll find a small black box - it's the siren.


HTH


Mac
excellent, i had thought this was the horn tbh

ninja :drive

Post Reply