Anything goes in here.....
-
offshorematt
- Posts: 626
- Joined: Wed Jun 22, 2005 8:25 am
- Location: Aberdeen
Post
by offshorematt » Mon Jul 04, 2005 10:28 pm
Anyone know if the fibreglass struts that support the roof are expensive to replace? Mine aren't even - looks like the driver's head is too big for the car when the roof is up

-
Gareth
- Posts: 4959
- Joined: Thu Mar 10, 2005 12:19 pm
- Location: The Moon
Post
by Gareth » Tue Jul 05, 2005 7:43 am
Are you sure they are fibre glass???
Just call Murray Motor Company in Edinburgh.
G
-
offshorematt
- Posts: 626
- Joined: Wed Jun 22, 2005 8:25 am
- Location: Aberdeen
Post
by offshorematt » Tue Jul 05, 2005 3:04 pm
Don't know if they're fibreglass but they don't look like metal and you can't bend them...
Wanted to know approx cost before I called a dealer. Nothing worse than spending fifteen minutes trying to get them to understand what you're asking for only to have to say 'I'll leave it just now, thanks' when they turn out to be £100 each!!!

-
Gareth
- Posts: 4959
- Joined: Thu Mar 10, 2005 12:19 pm
- Location: The Moon
Post
by Gareth » Tue Jul 05, 2005 3:21 pm
Matt, how about calling Elise Parts?
They have access to second hand parts like that.
G
-
Shug
- Posts: 13835
- Joined: Wed Mar 09, 2005 8:28 pm
- Location: Deepest, Darkest Ayrshire
Post
by Shug » Wed Jul 06, 2005 2:12 pm
Yip, they are fibreglass (as are the cant rails and even the windscreen surround, incidentally!!)
I'd second a call to Geary at Eliseparts...
2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
-
offshorematt
- Posts: 626
- Joined: Wed Jun 22, 2005 8:25 am
- Location: Aberdeen
Post
by offshorematt » Sat Jul 16, 2005 4:47 pm
Looks like second hand is the way to go - Murray Motors wants £152 for the pair. There called 'bows' incidently...
When I was explaining which bits I was after, the guy on the parts desk asked if my Elise was a softtop

Doesn't fill you with confidence...
-
Stephen
- Posts: 1441
- Joined: Thu Apr 28, 2005 8:43 pm
- Location: Brocketsbrae Nr Lesmahagow
Post
by Stephen » Fri Aug 12, 2005 4:51 pm
Mat did you get new bows?
mine are the same one is ok but one is uneven.
-
offshorematt
- Posts: 626
- Joined: Wed Jun 22, 2005 8:25 am
- Location: Aberdeen
Post
by offshorematt » Sat Aug 13, 2005 8:18 pm
Got one second hand one from Eliseparts - they only had one in stock and since I've fitted it I've realised only one of them was deformed anyway... Problem sorted

-
romtootes
- Posts: 52
- Joined: Thu Mar 10, 2005 9:40 am
- Location: Gullane, East Lothian
Post
by romtootes » Fri Aug 19, 2005 9:02 am
or you could try a breakers, I need a couple as well come to think about it.
-
ninja
- Posts: 1086
- Joined: Mon Aug 01, 2005 8:43 am
- Location: Motherwell
Post
by ninja » Fri Aug 19, 2005 9:34 am
surely if one is uneven it's just too long - so you could cut it back to size?
ninja
-
Shug
- Posts: 13835
- Joined: Wed Mar 09, 2005 8:28 pm
- Location: Deepest, Darkest Ayrshire
Post
by Shug » Fri Aug 19, 2005 10:10 am
You ain't seen the S1 roof arrangement, have you?
Facking meccano set compared to the S2...

2010 Honda VFR1200F
1990 Honda VFR400 NC30
2000 Honda VTR1000 SP1
2000 Kawasaki ZX-7R
-
ninja
- Posts: 1086
- Joined: Mon Aug 01, 2005 8:43 am
- Location: Motherwell
Post
by ninja » Fri Aug 19, 2005 10:20 am
AH
good point!
ninja